2026-10-11T23:19:24Z https://www.scidb.cn/oai

10.57760/sciencedb.28175 2025-07-21T16:28:43Z

2025-07-21 Secondary strengthening phenomenon and δ phase precipitation behavior of wire arc additive manufactured Inconel 718 alloy by room temperature tension doi:10.57760/sciencedb.28175 en The room tensile strength of Inconel 718 alloy, fabricated by wire arc additive manufacturing, exhibited an obvious "M"-shaped trend (i.e. secondary strengthening) with increasing solution time within 890 - 980 ℃, and two strength peak positions showed obvious backward trend with the increasing solution temperature. The experimental results indicated that first strength peak obtains some fine granular δ phases at grain boundaries, but would not affect the volume fraction ratio of γ'' strengthening phases. However, when solution time is extended to second strength peak, the volume fraction of γ'' strengthening phases decreases slightly but its average particle size is invariant, accompanied by a notable increase in the number of fine granular δ phases at grain boundaries. Based on the fracture model established for δ phase, it is demonstrated that the multiple fractures of slender needle-shaped δ phase is the main reason for the obvious rise in the number of fine granular δ phases at grain boundaries of the second strength peak. Relative to MC carbide fracture, TEM results finally demonstrate that multiple fractures of δ phase introduce more fine granular δ phases, but this fracture behavior cannot cause for IN718's failure because of its lower lattice mismatch. 718; Ni-base; WAAM Zhou, Zhiquan Shan, He Wang, Yixiang Xu, Guangzhen Yuan, Tao Chen, Shujun PUBLIC https://creativecommons.org/licenses/by/4.0/ dataset Science Data Bank