2026-10-12T16:15:56Z https://www.scidb.cn/oai

10.57760/sciencedb.39310 2026-06-11T15:18:55Z

2026-06-11 The sealing effect of Electrochemical Polarization and its influence on the Tribological Properties of CrN Coatings doi:10.57760/sciencedb.39310 en In order to seal the void defects in CrN coatings so as to improve its mechanical and tribological properties, the electrochemical linear polarization (EP) treatments at different scanning rates were applied on CrN coatings. The effects of scanning rate on the microstructure, mechanical and tribological properties of the CrN coatings were investigated. The results showed that the CrN coatings still presented a stable crystal structure comprising of CrN(111) after EP treatment. No diffraction peaks of chromium oxide were found in the X-ray diffractograms patterns (XRD). However, the oxygen content of CrN coatings increased from 6.32 at% to 11.64 at%, and decreased gradually to 8.24 at% with the increasing of the scanning rate. It proved that only a small amount of amorphous chromium oxides was generated. These chromium oxides sealed the coating pores and decreased the porosity of the coating from 16.79 % to 10.83 % as a result, which increased the hardness by the degree of 21.2 %. Meantime, the wear resistance of CrN coatings was all enhanced after EP treatment. Among them, the CrN25 coating showed the lowest wear rate, which was reduced by 46.0 % relative to the CrN0 coating due to its high hardness, weak oxidative wear, and better plastic deformation capability.  Electrochemical polarization; Scanning rate; Pore sealing; Mechanical properties; Tribological properties Wang Xin Wang Qianzhi Weng Zhiyuan Wang Changshun Yin Haofeng Zhou Fei Zhou Zhifeng PUBLIC https://creativecommons.org/licenses/by-nc-nd/4.0/ dataset Science Data Bank