<?xml version="1.0" encoding="UTF-8"?>

<?xml-stylesheet type="text/xsl" href="/static/oaitohtml.xsl"?>

<!--
<?xml-stylesheet type="text/xsl" href="/oaitohtml.xsl"?>
-->

<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <responseDate>2026-10-14T22:14:51Z</responseDate>
    <request verb="GetRecord" metadataPrefix="oai_dc" identifier="10.57760/sciencedb.j00124.00291" >https://www.scidb.cn/oai</request>
<GetRecord>
    <record>
    <header >
    <identifier>10.57760/sciencedb.j00124.00291</identifier>
    <datestamp>2026-03-16T18:51:08Z</datestamp>
</header>
    <metadata>
        
<oai_dc:dc xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:date>2026-03-16</dc:date>
  <dc:title>Dataset：SiO2-Coated ZIF-67-Derived Cobalt Catalyst for  Hydrodeoxygenation of Guaiacol to Cyclohexanol</dc:title>
  <dc:identifier>doi:10.57760/sciencedb.j00124.00291</dc:identifier>
  <dc:language>en</dc:language>
  <dc:description>The crystal structures of the samples were analyzed by Rigaku Ultima IV X-ray diffraction (XRD). The pore structure characteristics of the catalysts were measured using a V-Sorb 4804 specific surface area and pore size analyzer (BET) manufactured by Beijing Jinaipu Co., Ltd. The morphology and microstructure of the catalysts were observed using a ZEISS Sigma 300 scanning electron microscope (SEM) and a JEOL JEM-F200 transmission electron microscope (TEM), respectively. The cobalt content in the catalysts was determined by an Agilent 5110 inductively coupled plasma optical emission spectrometer (ICP-OES). Hydrogen temperature-programmed reduction (H2-TPR) and hydrogen temperature-programmed desorption (H2-TPD) were performed on an Anton Paar China ASIQC050200-6 fully automatic temperature-programmed chemisorption instrument. Before the H2-TPR test, the sample was pretreated in flowing helium at 200 &amp;deg;C for 30 min to remove surface adsorbates, then cooled to room temperature, switched to a 10% H2/Ar mixture, and heated to 800 &amp;deg;C at 5 &amp;deg;C/min. Hydrogen consumption signals were monitored using a thermal conductivity detector. Before the H2-TPD test, the sample was pretreated by the same procedure. After cooling to room temperature, the gas was switched to 10% H2/Ar for H2 adsorption until saturation. The sample was then purged with flowing helium for 30 min to remove physisorbed H2, followed by heating to 600 &amp;deg;C at a rate of 5 &amp;deg;C/min for H2 temperature-programmed desorption. The amount of desorbed H2 was detected by TCD. K-Alpha X-ray photoelectron spectroscopy (XPS) was used to analyze the chemical states and relative contents of elements on the sample surface. Raman spectroscopy (Raman) measurements were performed on a scientific LabRAM type spectrometer from HORIBA, Japan. Thermogravimetric analysis (TGA) was carried out by the HTG-1 thermogravimetric analyzer made by Beijing Hengjiu Scientific Instrument Factory. The analysis was conducted in an air atmosphere with a gas flow rate of 100 mL/min, a temperature range from room temperature to 800 &amp;deg;C, and a heating rate of 5 &amp;deg;C/min.</dc:description>
  <dc:subject>guaiacol; hydrogenation deoxygenation; core-shell cobalt-based catalyst; cyclohexanol; ZIF-67</dc:subject>
  <dc:creator>cao li na</dc:creator>
  <dc:creator>Wang Xun</dc:creator>
  <dc:creator>Ren Ruipeng</dc:creator>
  <dc:creator>Yang Fan</dc:creator>
  <dc:creator>Zhao Nankai</dc:creator>
  <dc:creator>Lv Yongkang</dc:creator>
  <dc:rights>PUBLIC</dc:rights>
  <dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights>
  <dc:type>dataset</dc:type>
  <dc:publisher>Science Data Bank</dc:publisher>
</oai_dc:dc>

    </metadata>
</record>
</GetRecord>
</OAI-PMH>